06+ Honda TRX450R 103mm 14:1 Piston
This is a custom CP Piston.
Piston is a 103mm Bore Size and has 14:1 Compression Ratio.
Piston Requires 110+ Octane Race Fuel, Alcohol, or E85.
This Piston features large and deep valve pockets to clear oversize valves (will clear +3mm Intake Valves and +2mm Exhaust Valves) and most high lift camshafts. Piston has vertical gas ports and under dome lightening to provide the upmost performance. Wrist Pin has Diamond Like Coating (DLC) for best performance and reliability.
Fits in 103mm Cylinder and will work with any stock stroke application or application that uses a stock piston.
*Please Note: Piston will require clearance work to clear the Oil Squirter in Stock Stroke and Short Rod Stroker (Hot Rods, etc.) Builds. Piston to Oil Squirter Clearance must be checked for adequate in all other builds. Minimum of 0.015" clearance between Piston and Oil Squirter is required. Please Contact Us or your Local Engine Builder / Machine Shop if you are unable to measure clearance or modify piston for adequate clearance between piston and oil squirter.*
