Kibblewhite Racing Valve Spring Kit
Fitment:
-19+ Honda Talon 1000 R / X / X-4
-17-19 Honda CRF1000
These Kibblewhite Valve Spring Kits are a beehive style spring setup and include Steel Retainers and Base Washers. Valve Springs good to .470" Valve Lift on the Intake and .450" Valve Lift on the Exhaust.
Kibblewhite Valve Spring Kit Includes:
-Kibblewhite Beehive Valve Springs
-Kibblewhite H.T. Steel Retainers*
-Kibblewhite H.T. Steel Basewashers
By taking advantage of the latest development in valve spring wire chemistry and manufacturing techniques, Kibblewhite has developed ovate wire Beehive style springs that will live and Perform at a high level in Honda applications. By coupling these developments with strict Kibblewhite design protocols and employing multiple design, simulation, and FEA analysis software, we were we able to overcome the torsional stresses unique to ovate wire springs that previously severely limited their operating parameters. Kibblewhite Beehive Springs are progressively wound using Kobe Super-Clean chrome silicon based wire that is heat treated and shot peened. Kibblewhite uses its tightly toleranced, FEA designed hardened H.T. Steel retainers in these applications to ensure correct assembly height and resist keeper pull through. The hardened steel basewashers included in these kits are designed to locate the spring and control lateral movement.
*NOTE: Higher than Stock Lift Camshafts may require Kibblewhite Shortened Valve Guides to provide adequate retainer to seal clearance.*
