Kibblewhite Cylinder Head Studs
Fitment:
-04-14 Honda TRX450R
-02-08 Honda CRF450R
-05-17 Honda CRF450X
This Head Stud Kit is avalibale as a Stock Replacement Stud Kit (12mm Case Threads, 10mm Head Threads) and 12mm Oversized Stud Kit (Similar to ARP Stud Kit, 12mm at Case and Head, Requires Head Modification, and possible cylinder modification)
Head Studs allow for higher torque, and do not stretch like some of the OEM Studs are known to do. These are a must in high performance NA, Turbo, Supercharged, and Nitrous Engines. These Studs help prevent Head Gasket Failure.
Stock Replacement Studs are torqued to 40 ft/lbs (Same as Stock). 12mm Oversize Studs allow increased Torque to 50 ft/lbs, which increases clamping load by 1300 lbs over the OEM Honda Studs / Kibblewhite Stock Replacement Studs.
Kit Includes:
-Kibblewhite 10mm Reduced Shank or 12mm Oversized Head Studs
-Kibblewhite 10mm or 12mm Head Stud Nuts
-Kibblewhite 10mm or 12mm Washers
-Installation Instructions
No Drilling or Tapping required for installation of Stock Replacement Stud Kit. 12mm Oversize Stud Kit requires Drilling Cylinder Head Stud Holes to 1/2". Some Aftermarket Cylinders (CPI Cylinders, etc.) may also require drilling to clear 12mm Oversize Studs. No Crankcase Modification or Tapping is required (Stock Case Threads are already 12mm).