JE Pistons
Fitment:
-06-14 Honda TRX450R*
-02-08 Honda CRF450R
-05-17 Honda CRF450X
Bore Size: 96mm (Stock Bore).
Replacement Components are available, please see below.
Includes:
-JE Forged Piston
-JE Piston Ring Pack
-JE Wrist Pin
-1 Set of JE Piston Pin Clips
Piston Specs:
96mm 12.5:1 Pistons (274755):
-Bore Diameter: 96.00mm
-Piston Head Type: Dome
-Piston Dome Volume: 0.4cc's
-Cylinder Head: CRF450
-Compression Height: 0.943"
-Piston Pin Outside Diameter: 0.748"
-Piston Pin Length: 2.050"
-Piston Pin Material: 9310 Steel
-Ringset Included: Yes
-Top Compression Ring Thickness: 0.0383"
-Oil Ring Thickness: 0.0795"
-Piston Material: 2618 Aluminum Forged
-Forging Type: FSR
-Piston Avg Weight: 273 g
-Pin Wall Thickness: 0.160"
96mm 13.5:1 Pistons (274756):
-Bore Diameter: 96.00mm
-Piston Head Type: Dome
-Piston Dome Volume: 3.4cc's
-Cylinder Head: CRF450
-Compression Height: 0.943"
-Piston Pin Outside Diameter: 0.748"
-Piston Pin Length: 2.050"
-Piston Pin Material: 9310 Steel
-Ringset Included: Yes
-Top Compression Ring Thickness: 0.0383"
-Oil Ring Thickness: 0.0795"
-Piston Material: 2618 Aluminum Forged
-Forging Type: FSR
-Piston Avg Weight: 282 g
-Pin Wall Thickness: 0.160"
12.5:1 Piston will work well with 91+ Octane Pump Gas. 13.5:1 Piston requires 110+ Octane Race Fuel. Pistons are a 2-Ring Piston Design for lightweight racing applications (Same as Stock 02-08 CRF450R Piston). Pistons have large valve pocket diameters to clear +2mm Valves. If using high performance camshafts, Piston to Valve Clearance must still be checked to insure deep enough valve pockets.
*Advertised Piston Compression Ratios provided are for CRF450R / CRF450X Applications. The TRX450R uses a thicker head gasket (0.027" vs 0.018" Gasket Thickness used on CRF Models). This may result is lower than advertised compression ratio when used in the TRX450R application due to increased deck height (piston to head clearance). It is recommended to check deck height (piston to head clearance) and adjust by using different thickness head / base gasket or decking cylinder surface (we recommend 0.040" Deck Height Clearance).
Replacement Components:
Replacement Ring Pack:
-ZV9600 (Fits All Pistons)
Replacement Wrist Pin:
-748-2050-16-93C (Fits All Pistons)
Replacement Wrist Pin Clips:
-748-050-MW (Fits All Pistons)
