Web Camshafts for the 2014 RZR XP1000. Web Cams are the best cams available on the market. they have some of the best selections of any camshaft manufacture.
This Cam Grind is #45/813
Camshaft Specs are:
Valve Lift: .415" / .388"
Duration: 268 / 268
Duration as .050": 243 / 244
Performance profile increases mid and upper end power. Requires Exhaust System, High Compression Piston, Shim Under Followers, and Performance Valve Spring Kit. Check ALL clearances! Price Per Set (2).
This camshaft is good for mid to top end power for duning / drag racing. This is the same intake camshaft as the #45/297 camshaft, but the exhaust camshaft lobe is higher lift and higher duration. This will will result in slightly better top end power, but will likely sacrifice some mid range and low end power. High Compression, Exhaust, and Cylinder Head Porting is highly recommended with this camshaft. This camshaft does require the use of Shim Under Buckets and Valve Spring Kits. Please see product options to purchase these with your camshaft. Please Note: No Warranty if you do not use the Valve Spring / Buckets available in the product options.
For information about Billet Vs. Hardwelded Cams and Which option is better for you. Please Click Here.
For Information on RZR XP1000 Valve Springs. Please Click Here.
For Information on RZR XP1000 Cam Chain Tensioners, Please Click Here.
For Information on the Shim Under Bucket Conversion, Please Click Here.