Skip to main content

06+ Honda TRX450R / 02-08 Honda CRF450R / 05-17 Honda CRF450X JE 97mm 12.5:1 +1mm Bore (2-Ring) Piston Kit

JE PISTONS

MSRP: $265.67
$191.00
(You save $74.67 )
(No reviews yet) Write a Review
SKU:
121-027-101-274757
Availability:
Usually Ships in 24 Hours
Shipping:
Calculated at Checkout
Manufacturers Part #:
274757
Replacement Parts:
Replacement Parts are Available for these Pistons, Please See Description Below.
Adding to cart… The item has been added

JE Pistons

Fitment:
-06-14 Honda TRX450R*
-02-08 Honda CRF450R
-05-17 Honda CRF450X

Bore Size: 97mm (+1mm Big Bore). Cylinder Requires Boring and Replating, Service Available Here.

Replacement Components are available, please see below.

Includes:
-JE Forged Piston
-JE Piston Ring Pack
-JE Wrist Pin
-1 Set of JE Piston Pin Clips

Piston Specs:

97mm 12.5:1 Piston (274757):
-Bore Diameter: 97.00mm
-Piston Head Type: Dome
-Piston Dome Volume: -0.1cc's
-Cylinder Head: CRF450
-Compression Height: 0.943"
-Piston Pin Outside Diameter: 0.748"
-Piston Pin Length: 2.050"
-Piston Pin Material: 9310 Steel
-Ringset Included: Yes
-Top Compression Ring Thickness: 0.048"
-Oil Ring Thickness: 0.0795"
-Piston Material: 2618 Aluminum Forged
-Forging Type: FSR
-Piston Avg Weight: 278 g
-Pin Wall Thickness: 0.160"

12.5:1 Piston will work well with 91+ Octane Pump Gas. Pistons are a 2-Ring Piston Design for lightweight racing applications (Same as Stock 02-08 CRF450R Piston). Pistons have large valve pocket diameters to clear +2mm Valves. If using high performance camshafts, Piston to Valve Clearance must still be checked to insure deep enough valve pockets.

*Advertised Piston Compression Ratios provided are for CRF450R / CRF450X Applications. The TRX450R uses a thicker head gasket (0.027" vs 0.018" Gasket Thickness used on CRF Models). This may result is lower than advertised compression ratio when used in the TRX450R application due to increased deck height (piston to head clearance). It is recommended to check deck height (piston to head clearance) and adjust by using different thickness head / base gasket or decking cylinder surface (we recommend 0.040" Deck Height Clearance). 

Replacement Components:

Replacement Ring Pack:
-ZS9700

Replacement Wrist Pin:
-748-2050-16-93C

Replacement Wrist Pin Clips:
-748-050-MW